https://www.upload.ee/..._fu11.rar.html
Mirror / Зеркало
https://wdho.ru/6R8R
Mirror / Зеркало
https://cloud.mail.ru/...tBim/vBHdxTVUo

password softoroom

https://www.upload.ee/...oRooM.rar.html
Mirror / Зеркало
https://wdho.ru/b3hU
Mirror / Зеркало
https://cloud.mail.ru/...BvZQ/JxHPJkrHu

password softoroom

* cFosSpeed can now communicate with other cFosSpeed drivers on your LAN to
share statistical data of how much each of them sent. This increases the
accurary of traffic shaping with more than one machine. We call this
feature "net_talk". Statistics are sent out as UDP packets (by default on
port 889) five times a second with TTL 1 to your local subnet broadcast
address, so they will never leave your LAN.

cFosSpeed will show other party's traffic in the Liquid Crystal skins
together with your own traffic, just less intensely coloured. The Traffic
Analysis skins show the total traffic as small bars under the numerical
speed display.

There is the new command "ts" or "talkstat" to see which other machines on
your LAN use cFosSpeed. The variable "net_talk" can be set to 0 to disable
this feature. You can change the UDP port number with the global variable
"net_talk_port"; it must be the same on all machines in the LAN.

* cFosSpeed now measures the variance of ping packets and uses this value
when shaping. Usually the variance is quite small (e.g. with DSL 16 mbit/s
it's about 4ms), but with wireless networks it can be substantially higher.

This value can be accessed via variable "variance" (spd set variance). If
you don't want this value to be automatically changed by cFosSpeed, set the
global variable "vari_fixed" to 1 (spd gset vari_fixed 1 -save).

The "variance" variable will not be automatically changed if you have
selected the variable non-cooperative algorithm, since cFosSpeed will not
know if changes in ping time are due to variance or traffic from other LAN
users. If you use more than one machine on the LAN, be sure to use cFosSpeed
on all of them with variable cooperative algorithm.

The statistical data on which the variance calculation is based will decay
after 15 minutes, so values that are too old will not be used.

* New skins added: "TA Insight Skin", with Windows 7 look and real-time
analysis. Both traffic analysis skins now have a ping variance display and
a traffic shaping indicator. The ping variance display shows the variance
and statistical certainty of the ping times of your connection. The traffic
shaping indicator flashes whenever a packet is prioritized, i.e. when it is
sent faster than it would without traffic shaping.

* Technology update: cFosSpeed is now an NDIS 6 driver for Vista and Windows 7.
Thereby cFosSpeed supports the improved performance of the new network
architecture.

* Mobile Broadband Plattform of Windows 7 is now supported. So users of UMTS,
WCDMA, CDMA2000, etc. equipment with native mobile broadband drivers can now
enjoy the benefits of cFosSpeed Traffic Shaping.

* The "Programs" and "Protocols" dialogs under "Settings" now allow setting
tx-limits per program resp. per protocol, i.e. maximum send speeds. See
below for "limit classes and filters" for a more technical explanation of the
feature.

* New adapter info dialog to display info about the network cards in your
system. There is detailed info for WLAN and WWAN. For WLAN you can
try to use the channel recommendation for best throughput in "crowded"
areas. But remember the frequency usage may change from minute to minute.
For WWAN (Win 7 mobile broadband adapters) you get detailed information
about the state of your UMTS/WCDMA/Wi-Max/etc. device.

+ Ingo Günther (our graphics artist) donated again a new icon skin which nicely
displays LAN traffic with the Net Talk feature.

+ Added "DivX" to the list of streaming agents for the layer-7 protocol
detection.

+ HTTP GET requests are now sent to the high queue regardless of the class of
their connection.

+ The skins can now load images with GDI+, thus supporting the formats PNG,
TIFF, JPG and GIF. Images of dialogs are now in PNG format. The skins can
now use XRGB 32bit bitmap files, in addition to the ARGB format.

+ Added download option for more skins in the context menu.

+ Two more languages added: Ukrainian & Vietnamese. That makes a total of 28
languages supported. Even more languages are downloadable from our web site,
here: http://www.cfos.de/sp...ation/lang.htm

+ The count of connections displayed in skin windows now by default displays
the sum of TCP + UDP connections (formerly it was only TCP connections), but
can be switched to either only TCP, only UDP or both by clicking on the
count.

+ Global variables (accessible through "spd gset") are now written to the
registry as well, so cFosSpeed can use them when booting.

+ Added l7-detection for Teredo (and Teredo bulk) IPv6 tunnelling. Thanks to
Zbig for inspiration.

+ Global variable checksum_ip may now be set to 2 as well, meaning that IP
checksum will only be checked on incoming packets.

+ cFosSpeed now uses link speeds as reported by Windows as upper limits.

! gset variable default_reg_id is now called reg_id_default.

x Pinging with UDP is now preferred over ICMP, if both work. UDP pinging is
more reliable. This should fix Traffic Shaping not working properly with
some routers.

x "spd ports" now shows the correct port numbers. These port numbers can be
used to send spd commands directly to a certain port, like "spd 1 cstat".
Thanks to Jacques Zurbriggen for his help.

x Fixed a bug in filter rules: when a protocol or program is set to non-normal
priority by factory defaults and the user changed the priority to normal, it
would have no effect, i.e. the factory default priority would still be used
instead or the normal priority the user had set. Thanks to Peter Chamberlin
for his bug report.

x Fixed sending priority of pings. This should increase reliability of
pingers.

x cFosSpeed caused delay before sleep or hibernate. Fixed.

x The program and protocols dialogs will now automatically save their settings
when you switch to another dialog page by clicking on menu on the left.

x Fixed slow Sleep/Hibernate problems.

x Fixed missing tracing for spd.exe and missing trace output under strange
conditions in speedsrv.dll.

x Fixed double dumping of settings to trace at the beginning of connection.

x When uninstalling (or doing an update install), Setup will wait for the
sdp.exe service to be deleted before going on. This should fix a problem
where after an update install the status window is gone. Thanks to
Richard B. for bug report.

x Switching the language did not change the language of the dialogs. Fixed.

x IPlist's were not loaded at program start, only with
"spd reload -iplist". Fixed. Thanks to bazolo for bug report.

x Fixed a bug that crashed some Vista & Windows 7 systems when uninstalling.
Thanks to Ingo Günther, Peter Fischer and others for dump files.

x Now handle_mss is 0 by default, i.e. TCP MSS is not changed by cFosSpeed.
This should fix problems with some strange web sites.

x Fixed a problem where the installer would sometimes not find old
installations.

- UDP checksum checking is now off by default.

- cFosSpeed queues now by default outgoing data for a maximum of 1 sec instead
of 3 secs. This forces TCP to adjust to line conditions faster. You can
change this settings by setting "spd gset max_queue_time -save", where
is measured in milliseconds.

- Executables are now flagged to support Data Execution Prevention (DEP) and
Address space layout randomization (ASLR), two security features of Windows
and are now flagged to support 3GB of user space memory.

- The reg_id = 1 (fixed) has been removed. Only 2 (cooperative) and 3 (not
cooperative) remain.

Открыла первый exe файл cfosspeed-v600.exe А что делать со вторым exe
файлом cfosspeed-x64-v600.exe ? Он не открывается. А при активации сообщается, что неудачно установлен ключ активации.

Большое спасибо. Я так и делала. Но сегодня изменился значок ключа, там появилась картинка вместо голубого квадратика. И у меня все получилось! Скорость значительно возросла.

скачать с softoroom
https://softoroom.org/...iles/l4zvzur05

Итак, кряк по средствам инжекта системной dll:

1. lpk.dll поместить в папку с установленной программой (рядом со взламываемым *.exe - X:\Program Files\cFosSpeed\)
2. (WinXP) Язык и региональные стандарты(поставить галку): Установить поддержку языков с письмом справа налево и сложным письмом. Перезагрузить компьютер (для установки поддержки языков с письмом справа налево и сложным письмом возможно потребуется дистрибутив Windows)
2*. (Win7) добавить ключь в реестр из архива Win7_lp.rar

Added support for Logitech G15 and G19 Gamer keyboards. When cFosSpeed detects such a keyboard, it offers a the option to display the status window on the display of the G15 or G19 display. If you enable it, the skin windows will then be displayed on the keyboards display, thereby offering all cFosSpeed Traffic Shaping information during fullscreen mode apps / games. In addition, you can switch between low latency / favour bandwidth wit the Button 1 on the G15 and the UP Button on the G19.
Skins for Logitech G15 & G19 were donated by Ingo Gunther.
Added keyboard LED indicators. cFosSpeed can indicate certain traffic shaping values by blinking the Num Lock and Scroll Lock LEDs. See http://www.cfos.de/en...board-leds.htm for more information.
When the traffic class is still not set (at the beginning of a connection) the class column will display "working" or nothing. If more traffic is coming, the class name will be shown or when no rule matches and no class has yet been set for a connection the class is set to default.
If traffic shaping is (partly) inactive, this is now shown in "spd speed" command.
Added -udp-vol rule: it counts the volume of an UDP pseudo-connection. Volume in this sense are all bytes including the IP and UDP header. Added -udp-cnt rule: it counts the number of UDP packets in an UDP pseudo-connection.
Extended arguments for -tcp-seq and -tcp-cnt rules to 64 bit.
Added gset variable tx_shape, default 1, to en/disable tx-shaping globally.
TCP SYNs were not properly prioritized. Fixed.
Uploads do now slow down downloads less than before.
Fixed behaviour of overlapping active areas in skins. Now the topmost one catches the mouse click.
For troubleshooting, you can now specify the Net Talk broadcast address. Use "spd set net_talk_bcast x.x.x.x" to do that, address 0.0.0.0 means use default, which is 255.255.255.255 or the subnet broadcast address like 192.168.0.255. Thanks to Drool for inspiration.
Fixed serious bug in -l7-prot, -udp-prog, -tcp-prog and -prog filter rules when they were used with negation (like -l7-prot [email protected]/normalprots). This caused program and protocol settings to malfunction if you had made changes to them (changes are recorded in user.ini and filter rules contain negations to read them properly). This bug was introduced in since v5.13.1694. Thanks to km for his bug reports.
The installer started the status window with elevation. Fixed.
Fixed installation problems where cfosspeed.exe could not be overwritten.
Fixed a potential problem when stopping a system service. Thanks to Richard B. for testing.
Skins would not display more than 21Mb/s speed. Fixed. Thanks to kamcm for bug report.
Fixed a long-standing problem where cFosSpeed might perform poorly after a wakeup from standby. Notably, UDP connections would not time-out and ever increase in numbers.
Fixed a error where certain skins would be incorrectly loaded and thus not displayed at all.
Fixed a bug in -prog and -l7-prot filters: they did not properly accept multiple arguments separated by commas. Thanks to Thomas Quella for his bug report.
Large ping values were always displayed as 999ms. Fixed.
On some machines the status window was always topmost. Fixed.
Fixed a spurious freeze. Thanks to Andrey Chernov for dump file.
For Windows 7 the main icon is not hidden as long as at least one icon skin is displayed. Otherwise Windows cannot remember the icon settings. If you don't want to see the main icon, you can disable it in the context menu. For older OSes the main icon is hidden as long as at least one icon skin is displayed.
Variance accommodation now works for satellite connections with their very long ping times as well. Thanks to ipcopter.de for help and support.
No pinger boot will be done if both rx_shape and tx_shape are 0.
Better tracking if test-pings reached the destination. If so, pinger will not be used for burst and pingstat line starts with a '+'.
Tested cFosSpeed with "teaming". We used an Intel Gigabit ET Dual Port Server Adapter and their most recent teaming software v16.2. Please note: The route to the Internet must go through the virtual teaming adapter, not through one of the individual teamed adapters.
Important notifications, e.g. the calibration notification and the trial period expiration messages are now indicated by a symbol in the status window if the skin supports it. Otherwise, the usual browser popup is used. If you click on the symbol the corresponding website is displayed.
The options menu is now also available for non-admins.
More trace output for an installation problem where the service can not be deleted.
By default max_trace_size is now 10 mbytes.
Switched to new compiler.
If for some reason test-pings reach their destination (i.e. they are not returned with "TTL exceeded"), we inhibit further test-pings with that TTL.

https://softoroom.org/...Final.rar.html

P.s. Сброс триала проверен на ХР SP3